|
Bosch T101BR 4-Inch 10-Tooth Jig Saw Blades (5-Pack)
|
MSRP: $11.80
Your Price: $8.04
Savings: $ 3.76 ( 32% )
Shipping: Usually ships in 24 hours
Manufacturer: Bosch
|
|
Bosch T101BR 4-Inch 10-Tooth Jig Saw Blades (5-Pack) Features
|
5-pack
4-inch length
10 teeth
Down cutting plastic
Laminates
|
|
|
|
|
|
|
|
|
Additional Bosch T101BR 4-Inch 10-Tooth Jig Saw Blades (5-Pack) Information
|
5 Pack, 4", 10TPI, High Carbide Steel Bosch, T-Shank Jigsaw Blade, Reverse Tooth For Splinter Free Cuts On Top On Workpiece, Great For Laminated Particleboard, OSB, Plywood, Hard/Soft Woods & Plastics.
|
|
|
What Customers Say About Bosch T101BR 4-Inch 10-Tooth Jig Saw Blades (5-Pack):
|
|
Also it's easier to mark out on the top side. I used these with a Bosch jig saw to cut laminate counters after they were installed. I used 3/4 plywood under the laminate counter, so the overall thickness where the holes were cut was 1 -1/2 inches. They were the post form type, and it made the whole job much easier cutting out sink holes from the top (no chips at all). Avoids flipping over a counter after cutting a large sink hole in the middle. The blades may work in a standard jig saw but I did not try them. I ordered the countertops from hd, ready-made from the fabricator, straight runs of counter only, and recommend this approach -if you only do counter tops every 20 years or so.
THESE BLADES WORK FANTASTIC IN LAMINATED COUNTER TOPS FOR CUTTING SINK HOLES FROM THE TOP SIDE WITHOUT CHIPPING.
Great quality.Effortless to change between different types of blades.
|
|
 |
|
|
